Tensile and Fatigue Properties of Bituminuos Mixtures Incorporating Different Bitumen Grades
Fatigue and tensile is a performance indicator for road pavement. A bituminous mixture that good in durability, strength and performance will give a long life span and low cost maintenances of the flexible pavement. For this project, it was deals with two types of bitumen which are 60/70 penetrat...
Saved in:
| Main Author: | |
|---|---|
| Format: | Final Year Project |
| Language: | English |
| Published: |
Universiti Teknologi Petronas
2010
|
| Subjects: | |
| Online Access: | http://utpedia.utp.edu.my/1023/1/0001.pdf http://utpedia.utp.edu.my/1023/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Fatigue and tensile is a performance indicator for road pavement. A
bituminous mixture that good in durability, strength and performance will give a long
life span and low cost maintenances of the flexible pavement. For this project, it was
deals with two types of bitumen which are 60/70 penetration grade and 80/100
penetration grade. The bituminous mixture design use is Marshall Mix design to
perform Asphaltic Concrete and Hot Rolled Asphalt type of mixtures. The test was
conducted in order to achieve the objective is Beam Fatigue test and Indirect Tensile
Stiffness Modulus. From the result, it is shown that 60/70 pen grade bitumen
indicates higher value in initial stiffness, modulus of elasticity and maximum tensile
stress compare to 80/100 pen grade bitumen. However, bitumen 80/100 penetration
grade demonstrate higher number of cycles compare to 60/70 penetration bitumen.
Although the bitumen content for HRA mixture more higher from AC mixture, the
stiffness of mortar give more influence in term of performance compare with the
interlocking effect of aggregate. In term of construction, the HRA mixture would be
more costly due to high bitumen content needed to be use but the maintenance may
be lesser compare to AC mixture. |
|---|