Volatile chemical component differences between fully and partially dried merbau (Intsia sp.) wood using gas chromatography-mass spectrometry (GC-MS) in Malaysia
Wood is one of the most common material found in homes and industrial fires, particularly in Malaysia. The abundance of different types of wood used to build structures, frames, furniture and others are important to take note as wood is a conducive material that can be used to initiate and propaga...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Penerbit Universiti Kebangsaan Malaysia
2019
|
| Online Access: | http://journalarticle.ukm.my/15079/1/38165-121096-1-PB.pdf http://journalarticle.ukm.my/15079/ http://ejournal.ukm.my/jskm/issue/view/1247 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Wood is one of the most common material found in homes and industrial fires, particularly in Malaysia. The abundance
of different types of wood used to build structures, frames, furniture and others are important to take note as wood is a
conducive material that can be used to initiate and propagate a fire, particularly in forensic fire cases. This study was
conducted to provide the volatile chemical fingerprint of burnt Merbau (Intsia sp.) wood using gas chromatographymass
spectrometry (GC-MS). The wood samples were prepared under two conditions; fully dried and partially dried. Six
study replications of each condition were burnt outdoors and underwent an extraction process using activated carbon
tablets. The tablets were incubated in an oven for 16 hours at 80ºC. Next, the tablets were desorbed in two different
types of solvent; pentane and ethanol. The pentane- and ethanol-desorbed volatile products were then introduced into
the GC-MS. Volatile organic compounds obtained across both conditions were in the range of volatile acids, aromatics
and its derivatives, D-glucopyranose, phenolic derivatives and cycloalkane. The compounds emitted by fully and partially
dried Merbau wood samples were similar, differing only in the absence of malonic acid and succinic acid in partially
dried Merbau wood samples. Both solvents desorbed different types of volatile compounds. The burning behaviour of
partially dried Merbau wood were different to those documented from fully dried Merbau wood and is attributed to the
composition of wood rather than the dry or wet conditions. |
|---|