Search Results - ((((joint processing) OR (good processing))) OR (data processing))

The process parameter effects on hybrid structure of dissimilar materials made by friction stir welding by Hussein, Sadiq Aziz

“…The aim of this study is to investigate the process parameters effect on a joint made by friction stir welding for three dissimilar materials. …”
Get full text
Get full text
Get full text

Improving the Fatigue Life of Fusion-Welded Joints Using Shot Peening Method by Che Lah, Nur Azida

“…It was seen that the effect of shot peening and skimming process improved the fatigue life of fusion weld (at 190 MPa stress level), it is approximately 78% increase in fatigue life cycles for MMA peened skimmed joint, 94% increase for MIG peened skimmed joint and 90% increase for TIG peened skimmed joint. …”
Get full text
Get full text

Optimization Of Laser Soldering Parameters On Passive Devices by Nazarudin, Muhammad Zaim Hanif

“…Thus, the parameters in the soldering process needed to be controlled to produce a good quality, long lifespan, and more reliable solder joint. …”
Get full text
Get full text

Joint Modelling Of Longitudinal and Survival Data in Presence of Cure Fraction with Application to Cancer Patients’ Data by Salah, Khalid Ali

“…We introduce a new class of joint models in presence of cure fraction. In this joint model, the longitudinal submodel is a combination of a random mixed effect model and a stochastic process. …”
Get full text
Get full text

Optimization Of Laser Soldering Parameters On Passive Devices by Ahmad Nadzri, Faiz Farhan

“…The study of VOF model showed the usable of simulation approach to simulate the process of laser soldering that can produce a good results of solder joint.…”
Get full text
Get full text

Vision-based inspection of PCB soldering defects by Zailah W, Gan, B.Y.J., Leong, H.Y., Norsuzlin Mohd Sahar, Mohammad Tariqul Islam

“…Watershed-based image segmentation was performed in the image post-processing to segmented images; then, feature extraction was conducted using curvelet transform to prepare image feature data. …”
Get full text
Get full text
Get full text

Backhaul and performance optimality of joint processing schemes over the cluster area by Kousha, Mohammad, Hashim, Fazirulhisyam

“…It has been proved through Simulations that, centralized joint processing has better performance for both joint transmission and dynamic point selection in comparison with the partial joint processing. …”
Get full text
Get full text

Strengthening of bolted shear joint in ferrocement construction by Chiong, Chung Eng

“…Available equations for predicting the joint strength in ferrocement composites can be slightly modified to include the effects of these inserts with a good level of accuracy. …”
Get full text
Get full text
Get full text

Optimization of GMAW process parameters for improved mechanical properties of welded joints / Muhammad Sayyidil Irsyad Mohd Sufian by Mohd Sufian, Muhammad Sayyidil Irsyad

“…The problem that has faced the manufacturer is the control of the process input parameters to obtain a good welded joint with the required weld quality. …”
Get full text
Get full text

Development of optimum range of joint design for carbon steel by small wire submerged arc welding process / Saiful Yazan Jamaludin by Jamaludin, Saiful Yazan

“…Standard welding procedure test were applied on the welded joint. The result of tensile, bending and macro etching test were successful, thus verifying the good weldability or the process and its parameter.…”
Get full text
Get full text

Backhaul load and performance optimality of partial joint processing schemes in LTE-A networks by Kousha, Mohammad

“…Joint processing demands for considerable amount of backhauling, signaling and data sharing that put a doubt on its feasibility. …”
Get full text
Get full text

Reflow soldering process for Sn3.5Ag solder on ENIG using rapid thermal processing system by Nor Adhila Muhammad, Badariah Bais, Ibrahim Ahmad

“…The reflow soldering process can be performed better with appropriate reflow profile in the RTP system in order to achieve a good solder joint of Sn3.5Ag solder and ENIG substrate.…”
Get full text
Get full text
Get full text

Effect of corrosion on aluminium tailor welded blanks (similar material welding) by Muhammad Firdaus, Ab Moin

“…The data observed also show that the hardness and tensile properties of welded joint did decrease after the corrosion test. …”
Get full text
Get full text

Development of knee joint angle trajectory tracking for leg support mechanism by Wan Salleh, Wan Mohd Shukri

“…Then the actual desired knee joint angle trajectory data is given to the system and tuning process is repeated again to get best output response that shows closest angle trajectory compared to the desired trajectory.…”
Get full text
Get full text
Get full text
Get full text

Investigation on weld quality using different filler metals by Zetty Akhtar, Abd Malek

“…The effect of welding voltage and type of filler metals used to the weld joints were studied. The welding voltage had significance effect to the welding process, as high voltage resulted in poor appearance of the weld joint. …”
Get full text
Get full text

Reflow soldering process for Sn3.5Ag solder on ENIG using rapid thermal processing system by Adhila Muhammad N., Bais B., Ahmad I.

“…The reflow soldering process can be performed better with appropriate reflow profile in the RTP system in order to achieve a good solder joint of Sn3.5Ag solder and ENIG substrate. © Copyright Reserved 2007 Sains Malaysiana.…”

An approach to joint roughness measurement in Rock-A comparative study by Mohd. Amin, Mohd. For, Mustaffar, Mushairry

“…In the comparison process, data obtained using conventional method is used as reference. …”
Get full text
Get full text

Effect Of Temperature On Flexible Printed Circuit Board During Reflow Soldering Process by Muhammad Rafiq, Mohammad Sabri

“…For both FPCB and RPCB, component placements reduce deformation due to low wetting angle and component weight. For solder joint, FPCB solder joint has good wetting angle (<90°) which is indicate good solder paste deposited on the FPCB. …”
Get full text
Get full text

An Appraisal of Multibeam Echosounder Calibration by Mahmud, Mohd. Razali, M. D. E. K., Gunathilaka, Tang, Kelvin Kang Wee

“…One of the most impressive hydrographic technique developed over the past few decade is multibeam sonar systems. Sounding data from these systems is a result of processing information from several data sources. …”
Get full text
Get full text
Get full text

Impact of welding current and type of joint design on tensile properties of welded mild steel joint by using SMAW: article by Faizol, Muhamad Faiq, Abd Razak, Khalil

“…In this study, with the objective to determine the suitable welding current in order to produce the strongest mild steel joint from two separate metals, Mild Steel plates of 6mm were welded using different joint type using Shielded Metal Arc Welding process. …”
Get full text
Get full text