Combined method for die compensation in sheet metal forming
Sheet metal forming is one of the prominent methods to convert blank sheet material into a product. In sheet metal forming, proper allowance of its tools must be given to the elastic recovery, due to the nature of elastic property which is called springback. When stamped sheet components are remo...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | en en |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1211/1/24p%20AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN.pdf http://eprints.uthm.edu.my/1211/2/AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN%20WATERMARK.pdf http://eprints.uthm.edu.my/1211/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1833416743832256512 |
|---|---|
| author | Muhammad Marhaban, Agus Dwi Anggono |
| author_facet | Muhammad Marhaban, Agus Dwi Anggono |
| author_sort | Muhammad Marhaban, Agus Dwi Anggono |
| building | UTHM Library |
| collection | Institutional Repository |
| content_provider | Universiti Tun Hussein Onn Malaysia |
| content_source | UTHM Institutional Repository |
| continent | Asia |
| country | Malaysia |
| description | Sheet metal forming is one of the prominent methods to convert blank sheet
material into a product. In sheet metal forming, proper allowance of its tools
must be given to the elastic recovery, due to the nature of elastic property which
is called springback. When stamped sheet components are removed from the
forming tools, the internal stresses will rest, and a new equilibrium state will
be reached. As a result, the final shape of the drawn part will deviate from
the shape imposed by the forming tool. Therefore, it is very important that
springback be accurately predicted and compensated. In the industry, this is a
costly and time consuming process of product shaping and redesigning the tools
manually. The goal of this research is to develop a compensation procedure that
can perform this optimization process, using the combination of Displacement
Adjustment (DA) and Spring Forward (SF) methods. Both are based on an
iterative procedure. The method is needed for guiding die design to compensate
for springback in a backward direction and then to compensate springback in a
forward direction. This new approach is then called Combined Method for Die
Compensation (CMDC). The testing of CMDC has been conducted in 2D model
of U-bending and 3D shape of S-rail model adopted from Numisheet 2008. The
result shows that CMDC is able to reduce error in every cycle of the total five
cycles. The result of reduction in shape deviation is 66% to 73% for the 2D
model compensation, and for the 3D model, 55% reduction in shape deviation
can be reached. The CMDC method can be further implemented and integrated
in a commercial FEM software to assist the optimization process to improve the
precision of stamping products. |
| format | Thesis |
| id | my.uthm.eprints-1211 |
| institution | Universiti Tun Hussein Onn Malaysia |
| language | en en |
| publishDate | 2014 |
| record_format | eprints |
| spelling | my.uthm.eprints-12112021-09-30T06:28:14Z http://eprints.uthm.edu.my/1211/ Combined method for die compensation in sheet metal forming Muhammad Marhaban, Agus Dwi Anggono TS200-770 Metal manufactures. Metalworking Sheet metal forming is one of the prominent methods to convert blank sheet material into a product. In sheet metal forming, proper allowance of its tools must be given to the elastic recovery, due to the nature of elastic property which is called springback. When stamped sheet components are removed from the forming tools, the internal stresses will rest, and a new equilibrium state will be reached. As a result, the final shape of the drawn part will deviate from the shape imposed by the forming tool. Therefore, it is very important that springback be accurately predicted and compensated. In the industry, this is a costly and time consuming process of product shaping and redesigning the tools manually. The goal of this research is to develop a compensation procedure that can perform this optimization process, using the combination of Displacement Adjustment (DA) and Spring Forward (SF) methods. Both are based on an iterative procedure. The method is needed for guiding die design to compensate for springback in a backward direction and then to compensate springback in a forward direction. This new approach is then called Combined Method for Die Compensation (CMDC). The testing of CMDC has been conducted in 2D model of U-bending and 3D shape of S-rail model adopted from Numisheet 2008. The result shows that CMDC is able to reduce error in every cycle of the total five cycles. The result of reduction in shape deviation is 66% to 73% for the 2D model compensation, and for the 3D model, 55% reduction in shape deviation can be reached. The CMDC method can be further implemented and integrated in a commercial FEM software to assist the optimization process to improve the precision of stamping products. 2014-05 Thesis NonPeerReviewed text en http://eprints.uthm.edu.my/1211/1/24p%20AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN.pdf text en http://eprints.uthm.edu.my/1211/2/AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN%20WATERMARK.pdf Muhammad Marhaban, Agus Dwi Anggono (2014) Combined method for die compensation in sheet metal forming. Doctoral thesis, Universiti Tun Hussein Onn Malaysia. |
| spellingShingle | TS200-770 Metal manufactures. Metalworking Muhammad Marhaban, Agus Dwi Anggono Combined method for die compensation in sheet metal forming |
| title | Combined method for die compensation in sheet metal forming |
| title_full | Combined method for die compensation in sheet metal forming |
| title_fullStr | Combined method for die compensation in sheet metal forming |
| title_full_unstemmed | Combined method for die compensation in sheet metal forming |
| title_short | Combined method for die compensation in sheet metal forming |
| title_sort | combined method for die compensation in sheet metal forming |
| topic | TS200-770 Metal manufactures. Metalworking |
| url | http://eprints.uthm.edu.my/1211/1/24p%20AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN.pdf http://eprints.uthm.edu.my/1211/2/AGUS%20DWI%20ANGGONO%20MUHAMMAD%20MARHABAN%20WATERMARK.pdf http://eprints.uthm.edu.my/1211/ |
| url_provider | http://eprints.uthm.edu.my/ |