Modeling of a Jig Sampling and its Application in Disc Cutter Tools
The operations of preparing the deform sample and round bar mainly consist of the calculation of the bar’s unit weight. The Sampling process is conducted through the two cutting flows such as in line production and disc. The problems are then occurred in the second flow (in disc) in performing the c...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
iosrjournals.org
2012
|
| Subjects: | |
| Online Access: | http://eprints.utem.edu.my/id/eprint/7614/1/Journal_7_Din.pdf http://eprints.utem.edu.my/id/eprint/7614/ http://www.iosrjournals.org/about-iosrjournals.html |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The operations of preparing the deform sample and round bar mainly consist of the calculation of the bar’s unit weight. The Sampling process is conducted through the two cutting flows such as in line production and disc. The problems are then occurred in the second flow (in disc) in performing the cutting process on a certain length. Modeling of the jig sampling is used to solve this problem and also fully discussed throughout this paper. |
|---|