Design of filter integrated SPDT switch using capacitor loaded ring resonator with high isolation
A reconfigurable filter integrated single-pole double-throw (SPDT) switch (FIS) based on capacitor loaded ring resonators is presented in this paper. The design incorporates two PIN diodes between two symmetric square ring resonators. The ring resonators can be switched between all stop and bandpas...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
The Electromagnetics Academy
2022
|
| Online Access: | http://eprints.utem.edu.my/id/eprint/27069/2/0162722062023.PDF http://eprints.utem.edu.my/id/eprint/27069/ https://www.jpier.org/issues/reader.html?pid=22031804 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A reconfigurable filter integrated single-pole double-throw (SPDT) switch (FIS) based on capacitor loaded ring resonators is presented in this paper. The design incorporates two PIN diodes between two symmetric square ring resonators. The ring resonators can be switched between all stop and
bandpass responses, by adjusting the state of the PIN diodes, allowing the corresponding signal path to be in OFF-state with high isolation or ON-state with bandpass filter response. For demonstration, filtering switch was fabricated and measured for 2.4 GHz applications. The measurement results featured an ON-state low insertion loss of −2.1 dB and port-to-port isolation of −52 dB at the band of interest, and good consistency is achieved between simulated and measured results |
|---|