A New Speed Multiplier Coaxial Magnetic Gear
Due to certain conditions, electrical motor (EM) that operates at high speed may lead to magnetic saturation, thermal issue, and stress to rotor structure. Magnetic gear (MG) designed for speed multiplier enables the prime mover from EM to operate at lower speed while the output gear multiplies the...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
EMW Publishing
2020
|
| Online Access: | http://eprints.utem.edu.my/id/eprint/25029/2/15.20040103PIER.PDF http://eprints.utem.edu.my/id/eprint/25029/ https://www.jpier.org/PIERM/pierm93/15.20040103.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Due to certain conditions, electrical motor (EM) that operates at high speed may lead to magnetic saturation, thermal issue, and stress to rotor structure. Magnetic gear (MG) designed for speed multiplier enables the prime mover from EM to operate at lower speed while the output gear multiplies the speed by its designated gear ratio at reduced torque. In this paper, a new coaxial magnetic gear is designed for speed multiplier. The role between inner yoke with PM and pole piece is switched. The inner part of magnetic gear is made to be stationary while the pole piece becomes inner rotor. The working principle is presented analytically based on flux modulation techniques for torque and speed transmission. Torque characteristic and gear efficiency are analysed using finite element and
compared with existing speed multiplier magnetic gear with the same gear ratio of 7/3. Based on the
simulation result, the proposed speed multiplier MG offers 16% better torque density and 12% higher
gear efficiency at higher speed range. The structure of the inner rotor is also found to be more robust
as only pole piece ring together with plastic holding frame is rotated instead of yoke with PM |
|---|