Vibration strength estimation of a structure-borne source: Case study for a reception beam
This paper presents the estimation of vibration strength obtained from reception structure method. It describes a laboratory-based measurement procedure, which determines the strength of a vibration source in terms of its total squared free velocity. The source used in the experiment is a small e...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
Trans Tech Publications
2014
|
| Online Access: | http://eprints.utem.edu.my/id/eprint/10725/1/Vibration_Strength_Estimation_of_a_Structure-Borne_Source_Case_Study_for_a_Reception_Beam.pdf http://eprints.utem.edu.my/id/eprint/10725/ https://www.scientific.net/AMM.471.69 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This paper presents the estimation of vibration strength obtained from reception structure
method. It describes a laboratory-based measurement procedure, which determines the strength of a
vibration source in terms of its total squared free velocity. The source used in the experiment is a
small electric fan motor. Here instead of using the usual flat rectangular plate, a thin stainless steel
beam was used as the reception structure. The aim is to validate the data obtained from the reception
method with that from the direct measurement. A good agreement is found between the two results,
although small discrepancies occur due to the modal behavior of the beam. |
|---|