Effect of rake angle and feed rate on wear and roughness in machining carbon steel 1045
In metal industry, the optimum usage of insert in turning process is a common practice to reduce the machining cost. Hence, the endurance limit for the insert will be low and will affect the quality of the surface finish. Several studies have discovered the tool wear and surface roughness when...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Proceeding |
| Language: | en |
| Published: |
2020
|
| Subjects: | |
| Online Access: | http://ir.unimas.my/id/eprint/48292/3/Effect%20of%20rake.pdf http://ir.unimas.my/id/eprint/48292/ http://umpir.ump.edu.my/id/eprint/37112/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | In metal industry, the optimum usage of
insert in turning process is a common practice to reduce
the machining cost. Hence, the endurance limit for the
insert will be low and will affect the quality of the surface
finish. Several studies have discovered the tool wear and
surface roughness when machining parameter of the
process is properly considered. This study present
analysis of tool wear of carbide inserts in finish turning
of carbon steel 1045. This paper contribution concerns
the experimental occurrence of tool wear and roughness
for a continuous cutting condition of tool holder that has
a variable rake angle and variable of feed rate. So, these
parameters become critical to minimize the tool life and
roughness of the work part. |
|---|