Characterization of zinc oxide-based varistor ceramics prepared using solid state route and co-precipitation processing
There were few reports of fabrication of varistor ceramics that used as a protective device for electrical equipments from transient voltage surges. using other method than conventional solid-state. Hence, it is useful to characterize in terms of morphology, electrical non-linearity characteristics...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | en |
| Published: |
Selangor: Universiti Putra Malaysia
2014
|
| Subjects: | |
| Online Access: | http://dspace.psnz.umt.edu.my/xmlui/handle/123456789/3046 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | There were few reports of fabrication of varistor ceramics that used as a protective device for electrical equipments from transient voltage surges. using other method than conventional solid-state. Hence, it is useful to characterize in terms of
morphology, electrical non-linearity characteristics, and optical properties of it prepared by using co-precipitation processing, as this produces fine and homogenous powder, as well as conventional solid-state route. The objectives of the study are; to
prepare four systems of' ZnO based varistor ceramics through conventional solid-state route and co-precipitation technique to determine which factors affect most on electrical non-linearity behavior: secondly to carry out optical study of four systems
of ZnO based varistor ceramics obtain from conventional solid-state route and co-precipitation technique to elucidate the structure arrangement; and thirdly to investigate the degradation behavior of one system of ZnO based varistor ceramics (ZnO-Bi203-Ti02) to ascertain which preparation technique produce most stable electrical non-linearity coefficient. |
|---|