Study of cryogenic machining for single tip cutting tooll using new cooling system design
In steel machining, high cutting temperature result will reduce the cutting tool life and also reduce the product quality. Conventional cutting fluid used to controlling the high cutting temperature but it is ineffective. Unfortunately, it leads to environment pollution problem. Cryogenic cooling wh...
Saved in:
| _version_ | 1831520700557426688 |
|---|---|
| author | Hazwan Aizat, Mohamed Hussin |
| author_facet | Hazwan Aizat, Mohamed Hussin |
| author_sort | Hazwan Aizat, Mohamed Hussin |
| building | UMPSA Library |
| collection | Institutional Repository |
| content_provider | Universiti Malaysia Pahang Al-Sultan Abdullah |
| content_source | UMPSA Institutional Repository |
| continent | Asia |
| country | Malaysia |
| description | In steel machining, high cutting temperature result will reduce the cutting tool life and also reduce the product quality. Conventional cutting fluid used to controlling the high cutting temperature but it is ineffective. Unfortunately, it leads to environment pollution problem. Cryogenic cooling which is an environmental friendly coolant can help rids of conventional fluid pollution problem. Present works are design and fabricate cryogenic coolant system that suit with a conventional lathe machine. Three cylindrical AISI 1045 steel tested up with TNMG TT5100 which is a Chemical Vapor Deposition (CVD) coated tool insert. The result compared with dry machining, machining with soluble oil as coolant and machining with cryogenic coolant; use nitrogen gas as the coolant. Results indicate the benefit of cryogenic cooling in tool life and surface finish. This may be attributed by the reduction of cutting zone temperature. Further, from the result proves that soluble oil failed to improve cutting tool life and product surface finish. |
| format | Undergraduates Project Papers |
| id | my.ump.umpir.265 |
| institution | Universiti Malaysia Pahang |
| language | en en en en |
| publishDate | 2008 |
| record_format | eprints |
| spelling | my.ump.umpir.2652021-06-14T08:55:20Z http://umpir.ump.edu.my/id/eprint/265/ Study of cryogenic machining for single tip cutting tooll using new cooling system design Hazwan Aizat, Mohamed Hussin TP Chemical technology In steel machining, high cutting temperature result will reduce the cutting tool life and also reduce the product quality. Conventional cutting fluid used to controlling the high cutting temperature but it is ineffective. Unfortunately, it leads to environment pollution problem. Cryogenic cooling which is an environmental friendly coolant can help rids of conventional fluid pollution problem. Present works are design and fabricate cryogenic coolant system that suit with a conventional lathe machine. Three cylindrical AISI 1045 steel tested up with TNMG TT5100 which is a Chemical Vapor Deposition (CVD) coated tool insert. The result compared with dry machining, machining with soluble oil as coolant and machining with cryogenic coolant; use nitrogen gas as the coolant. Results indicate the benefit of cryogenic cooling in tool life and surface finish. This may be attributed by the reduction of cutting zone temperature. Further, from the result proves that soluble oil failed to improve cutting tool life and product surface finish. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/265/1/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Table%20of%20content%29.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/265/2/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Abstract%29.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/265/3/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Chapter%201%29.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/265/4/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28References%29.pdf Hazwan Aizat, Mohamed Hussin (2008) Study of cryogenic machining for single tip cutting tooll using new cooling system design. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. |
| spellingShingle | TP Chemical technology Hazwan Aizat, Mohamed Hussin Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title | Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title_full | Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title_fullStr | Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title_full_unstemmed | Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title_short | Study of cryogenic machining for single tip cutting tooll using new cooling system design |
| title_sort | study of cryogenic machining for single tip cutting tooll using new cooling system design |
| topic | TP Chemical technology |
| url | http://umpir.ump.edu.my/id/eprint/265/1/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Table%20of%20content%29.pdf http://umpir.ump.edu.my/id/eprint/265/2/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Abstract%29.pdf http://umpir.ump.edu.my/id/eprint/265/3/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28Chapter%201%29.pdf http://umpir.ump.edu.my/id/eprint/265/4/Study%20of%20cryogenic%20machining%20for%20single%20tip%20cutting%20tooll%20using%20new%20cooling%20system%20design%20%28References%29.pdf http://umpir.ump.edu.my/id/eprint/265/ |
| url_provider | http://umpir.ump.edu.my/ |