Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller
High speed milling (HSM) process limited by tool failure and dynamic instabilities due to the influence of relative vibration between tool and workpiece, so called chatter. Chatter vibration literally responsible for lower productivity and poor surface quality. In this project, chatter occurrence du...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
Penerbit UMP
2019
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/24725/7/Suppression%20of%20Chatter%20in%20High%20Speed%20Milling%20Machine.pdf http://umpir.ump.edu.my/id/eprint/24725/ http://journal.ump.edu.my/mekatronika/article/view/156 https://doi.org/10.15282/mekatronika.v1i1.156 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1831526347145478144 |
|---|---|
| author | Suparmaniam, Madan Varmma A. R., Yusoff |
| author_facet | Suparmaniam, Madan Varmma A. R., Yusoff |
| author_sort | Suparmaniam, Madan Varmma |
| building | UMPSA Library |
| collection | Institutional Repository |
| content_provider | Universiti Malaysia Pahang Al-Sultan Abdullah |
| content_source | UMPSA Institutional Repository |
| continent | Asia |
| country | Malaysia |
| description | High speed milling (HSM) process limited by tool failure and dynamic instabilities due to the influence of relative vibration between tool and workpiece, so called chatter. Chatter vibration literally responsible for lower productivity and poor surface quality. In this project, chatter occurrence during machining was suppressed using spindle speed variation (SSV) method via microphone online detection techniques. The initial experiment begins with constant material removal rate (MRR) where varies depth of cut, feedrate and spindle speed were analyzed using time and frequency domain. Then, based on the result, microcontroller based PID algorithm was tested again in active mode. The result shows magnificient differences in frequnecy.This proves that chatter occurrence during machining can be suppressed using spindle speed variation method with microphone feedback PID controller. This also offers high speed milling usage industries with extra benefits of high productivity and can conserve time and money. Moreover, this method could enable providing high efficiency, accuracy, quality of final workpieces and eliminates semi- finishing process. |
| format | Article |
| id | my.ump.umpir.24725 |
| institution | Universiti Malaysia Pahang |
| language | en |
| publishDate | 2019 |
| publisher | Penerbit UMP |
| record_format | eprints |
| spelling | my.ump.umpir.247252019-11-21T05:04:09Z http://umpir.ump.edu.my/id/eprint/24725/ Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller Suparmaniam, Madan Varmma A. R., Yusoff TS Manufactures High speed milling (HSM) process limited by tool failure and dynamic instabilities due to the influence of relative vibration between tool and workpiece, so called chatter. Chatter vibration literally responsible for lower productivity and poor surface quality. In this project, chatter occurrence during machining was suppressed using spindle speed variation (SSV) method via microphone online detection techniques. The initial experiment begins with constant material removal rate (MRR) where varies depth of cut, feedrate and spindle speed were analyzed using time and frequency domain. Then, based on the result, microcontroller based PID algorithm was tested again in active mode. The result shows magnificient differences in frequnecy.This proves that chatter occurrence during machining can be suppressed using spindle speed variation method with microphone feedback PID controller. This also offers high speed milling usage industries with extra benefits of high productivity and can conserve time and money. Moreover, this method could enable providing high efficiency, accuracy, quality of final workpieces and eliminates semi- finishing process. Penerbit UMP 2019 Article PeerReviewed pdf en cc_by_nc_4 http://umpir.ump.edu.my/id/eprint/24725/7/Suppression%20of%20Chatter%20in%20High%20Speed%20Milling%20Machine.pdf Suparmaniam, Madan Varmma and A. R., Yusoff (2019) Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller. Mekatronika - Journal of Intelligent Manufacturing & Mechatronics, 1 (1). pp. 21-26. ISSN 2637-0883. (Published) http://journal.ump.edu.my/mekatronika/article/view/156 https://doi.org/10.15282/mekatronika.v1i1.156 |
| spellingShingle | TS Manufactures Suparmaniam, Madan Varmma A. R., Yusoff Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title | Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title_full | Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title_fullStr | Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title_full_unstemmed | Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title_short | Suppression of Chatter in High Speed Milling Machine Using Spindle Speed Variation Method with Acoustic Feedback PID Controller |
| title_sort | suppression of chatter in high speed milling machine using spindle speed variation method with acoustic feedback pid controller |
| topic | TS Manufactures |
| url | http://umpir.ump.edu.my/id/eprint/24725/7/Suppression%20of%20Chatter%20in%20High%20Speed%20Milling%20Machine.pdf http://umpir.ump.edu.my/id/eprint/24725/ http://journal.ump.edu.my/mekatronika/article/view/156 https://doi.org/10.15282/mekatronika.v1i1.156 |
| url_provider | http://umpir.ump.edu.my/ |