Effect of cathode waste material concentration in conductive paint coating
The conductive paint coating can be used to control the electromagnetic interference in electronic application. Conductive paint coating was made by mixing the epoxy and hardener with cathode waste material (CWM) in order to manipulate their properties. In this study, the conductivity and the thickn...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Non-Indexed Article |
| Published: |
Universiti Malaysia Kelantan
2016
|
| Online Access: | http://discol.umk.edu.my/id/eprint/8491/ http://www.jtrss.org/JTRSS/volume4/JTRSS-21-12-16-MAZ13/4-2-78-81.pdf |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The conductive paint coating can be used to control the electromagnetic interference in electronic
application. Conductive paint coating was made by mixing the epoxy and hardener with cathode
waste material (CWM) in order to manipulate their properties. In this study, the conductivity and
the thickness of the paint has been studied. The thickness of conductive paint coating was depends
on the agglomeration of CWM content. The increasing of wt% of CWM, the thickness of paint is
increasing. Bruker D2Phaser X-Ray diffraction has been used in order to get the phase analysis of
the paint before and after soaking into Potassium Hydroxide solution. |
|---|