Investigation of alumina supported mixed nickel oxide and cerium oxide catalysts for syngas production
Catalysts containing mixtures of nickel oxide and cerium oxide with different ratio, 1:1, 1:2 and 2:1 were prepared by the sonochemical treatment. The sonication was prolonged for 45 min, constant for each of the catalyst prepared supported by alumina. The resultant catalysts were characterized usin...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Indexed Article |
| Published: |
Asian Publication Corporation
2016
|
| Online Access: | http://discol.umk.edu.my/id/eprint/7559/ http://www.asianjournalofchemistry.co.in/user/journal/viewarticle.aspx?ArticleID=28_3_24 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Catalysts containing mixtures of nickel oxide and cerium oxide with different ratio, 1:1, 1:2 and 2:1 were prepared by the sonochemical
treatment. The sonication was prolonged for 45 min, constant for each of the catalyst prepared supported by alumina. The resultant
catalysts were characterized using X-ray diffraction, scanning electron microscope, energy dispersive X-ray spectroscopy and temperature
programmed reduction (TPR) in H2. The syngas production was detected using temperature programmed gasification and it was done
under 5 % oxygen in helium. The coconut shell in powder form (3 μm) was used as a feedstock. X-ray diffraction patterns shows that all
of the catalyst was perfectly matched to the XRD patterns standard of NiO, CeO2 and alumina, indicating that the catalyst produce through
this method were in high purity. Energy dispersive X-ray spectroscopy results further confirmed that all of the elements contain inside the
synthesized catalyst were NiO, CeO2 and alumina were produced in each catalyst. 1:1 ratio of catalyst shows the highest syngas production
(H2/CO) with ratio 0.76 followed by 1:2 and 2:1 with 0.62 and 0.44, respectively. Compared to the standard optimum ratio of syngas
which is equal to 1, the experimental value which is 0.76 (nearer to 1), so that it can be used for production of acetic acid and acetyl oxide. |
|---|