Temperature sensing using CdSe quantum dot doped poly(methyl methacrylate) microfiber
This work describes noncontact temperature measurements using wavelength shifts of CdSe quantum dot (QD) doped poly(methyl methacrylate) microfiber. The sensor is fabricated using a drawing method by bridging two tapered single mode fibers with a polymer microfiber (PMF) approximately 3 μm in diamet...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Article |
| Published: |
Optical Society of America
2017
|
| Subjects: | |
| Online Access: | http://eprints.um.edu.my/19730/ https://doi.org/10.1364/AO.56.004675 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This work describes noncontact temperature measurements using wavelength shifts of CdSe quantum dot (QD) doped poly(methyl methacrylate) microfiber. The sensor is fabricated using a drawing method by bridging two tapered single mode fibers with a polymer microfiber (PMF) approximately 3 μm in diameter. A set of a PMF section with and without the doping of the CdSe-ZnS core-shell QD was applied as sensing probes and used to measure temperatures over the range of 25°C-48°C. The experimental results show that the doped PMF is able to achieve a higher performance with a reasonably good sensitivity of 58.5 pm/°C based on the wavelength shifting, which is about 18 times that of the undoped PMF temperature sensitivity. The proposed sensor showed a linear temperature sensing range that matches well with the physiologically relevant temperatures. Moreover, these results open the way for long-Term and high-stability realization of temperature sensing optical fibers. |
|---|