High voltage insulation tester / Hayati Abdullah and Rusini Abdul Rashid
The problem with using a multimeter to perform insulations tests is that it only tests at 1.5v DC. Very few components operate at this very low voltage so it really is no;t valid. It may easily give an open circuit reading when tested between the active leads and the frame. The peak voltage of the 2...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Student Project |
| Language: | en |
| Published: |
1986
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/62518/1/62518.pdf https://ir.uitm.edu.my/id/eprint/62518/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|