The electrical characteristics OF P-N junction fabricated on N-type silicon wafer by using solid dopant / Siti Hajartul Nadiah Badek Ruzaman
Diffusion is the major process in fabricating the p-n junction which controlled the amount of particular impurities that introduced into the semiconductor (such as Silicon) to alter the electrical characteristics by improving its conductivity. In this project, the effects of p-type dopant (Boron) di...
Saved in:
| Main Author: | |
|---|---|
| Format: | Student Project |
| Language: | en |
| Published: |
2010
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/46072/1/46072.PDF https://ir.uitm.edu.my/id/eprint/46072/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | Diffusion is the major process in fabricating the p-n junction which controlled the amount of particular impurities that introduced into the semiconductor (such as Silicon) to alter the electrical characteristics by improving its conductivity. In this project, the effects of p-type dopant (Boron) diffusion into n-type Silicon wafer by using solid dopant technique were studied. The study includes fabrication, calculation and characterization of p-n junction such as sheet resistance and current-voltage (I-V) characteristics. Boron Nitride wafer is used as a solid dopant in doping process. Two stages required in this diffusion process, starts with p re-deposition and followed by drive-in diffusion at variation of temperature and time. The affects of different temperature and time onto six samples are then characterized by using Four-Point-Probe and I-V tester to determine the sheet resistance and resistance before and after the diffusion process. The result showed that sheet resistance is proportional to resistivity which is the value of sheet resistance is decrease with increasing diffusion temperature and diffusion time. Then, type of diode and its characteristics is then were identified by comparing to the theoretical value. |
|---|