Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]
on the mechanical properties of the final product. Typically, the most important processing parameters are temperature, heating time and pressure but there are cases where more or fewer parameters are involved depending on the type of the materials, fabrication techniques including the capabilities...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM)
2020
|
| Subjects: | |
| Online Access: | https://ir.uitm.edu.my/id/eprint/36596/1/36596.pdf https://ir.uitm.edu.my/id/eprint/36596/ https://jmeche.uitm.edu.my/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1833065399870029824 |
|---|---|
| author | Tharazi, Izdihar Sulong, Abu Bakar Mohd Salleh, Farrahshaida |
| author_facet | Tharazi, Izdihar Sulong, Abu Bakar Mohd Salleh, Farrahshaida |
| author_sort | Tharazi, Izdihar |
| building | Tun Abdul Razak Library |
| collection | Institutional Repository |
| content_provider | Universiti Teknologi Mara |
| content_source | UiTM Institutional Repository |
| continent | Asia |
| country | Malaysia |
| description | on the mechanical properties of the final product. Typically, the most important processing parameters are temperature, heating time and pressure but there are cases where more or fewer parameters are involved depending on the type of the materials, fabrication techniques including the capabilities of the processing equipment. The traditional approach in experimental work is costly and time consuming due to evaluation of multiple dependent variables. In this paper, design of experiments (DOE) technique based on statistical analysis has been employed to optimize hot press parameters on tensile properties of unidirectional kenaf fibres reinforced polylactic-acid (PLA) composite. The kenaf/PLA composite samples were fabricated using hot press method by stacking the aligned kenaf fibres with the PLA films. The stacked materials were hot pressed at varying processing parameters specifically the temperature, pressure and heating time. The Box-Behnken Design (BBD) through Response Surface Methodology (RSM) was employed to identify the cause and effect of relationship between the processing parameters with the composite’s tensile strength and Young’s modulus. Results from ANOVA showed that all three parameters and interactions significantly affect the composite’s tensile strength. For Young’s modulus, pressure and heating time are the significant parameters. Optimal processing parameters for composite fabrication for optimum tensile properties are at 200 MPa, 3MPa and 7 minutes. |
| format | Article |
| id | my.uitm.ir-36596 |
| institution | Universiti Teknologi Mara |
| language | en |
| publishDate | 2020 |
| publisher | Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM) |
| record_format | eprints |
| spelling | my.uitm.ir-365962020-11-12T02:47:18Z https://ir.uitm.edu.my/id/eprint/36596/ Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] jmeche Tharazi, Izdihar Sulong, Abu Bakar Mohd Salleh, Farrahshaida Composite materials. TJ Mechanical engineering and machinery on the mechanical properties of the final product. Typically, the most important processing parameters are temperature, heating time and pressure but there are cases where more or fewer parameters are involved depending on the type of the materials, fabrication techniques including the capabilities of the processing equipment. The traditional approach in experimental work is costly and time consuming due to evaluation of multiple dependent variables. In this paper, design of experiments (DOE) technique based on statistical analysis has been employed to optimize hot press parameters on tensile properties of unidirectional kenaf fibres reinforced polylactic-acid (PLA) composite. The kenaf/PLA composite samples were fabricated using hot press method by stacking the aligned kenaf fibres with the PLA films. The stacked materials were hot pressed at varying processing parameters specifically the temperature, pressure and heating time. The Box-Behnken Design (BBD) through Response Surface Methodology (RSM) was employed to identify the cause and effect of relationship between the processing parameters with the composite’s tensile strength and Young’s modulus. Results from ANOVA showed that all three parameters and interactions significantly affect the composite’s tensile strength. For Young’s modulus, pressure and heating time are the significant parameters. Optimal processing parameters for composite fabrication for optimum tensile properties are at 200 MPa, 3MPa and 7 minutes. Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM) 2020 Article PeerReviewed text en https://ir.uitm.edu.my/id/eprint/36596/1/36596.pdf Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.]. (2020) Journal of Mechanical Engineering (JMechE) <https://ir.uitm.edu.my/view/publication/Journal_of_Mechanical_Engineering_=28JMechE=29/>, 17 (3). pp. 131-144. ISSN 1823-5514 ; 2550-164X https://jmeche.uitm.edu.my/ |
| spellingShingle | Composite materials. TJ Mechanical engineering and machinery Tharazi, Izdihar Sulong, Abu Bakar Mohd Salleh, Farrahshaida Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title | Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title_full | Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title_fullStr | Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title_full_unstemmed | Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title_short | Application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / Izdihar Tharazi... [et al.] |
| title_sort | application of response surface methodology for parameters optimization in hot pressing kenaf reinforced biocomposites / izdihar tharazi... [et al.] |
| topic | Composite materials. TJ Mechanical engineering and machinery |
| url | https://ir.uitm.edu.my/id/eprint/36596/1/36596.pdf https://ir.uitm.edu.my/id/eprint/36596/ https://jmeche.uitm.edu.my/ |
| url_provider | http://ir.uitm.edu.my/ |