Prediction of cutting force by using finite element method in end-milling of AISI 1018 medium carbon steel
The objective of this paper are to predict the cutting force using predictive model of finite element method (FEM) and validate thru experiments, and to analyze the influence of cutting parameters during the circular end milling of AISI 1018 medium carbon still employing uncoated carbide tool. Th...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
The Mattingley Publishing Co., Inc.
2020
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/87119/1/7393-Article%20Text-12854-1-10-20200510.pdf http://irep.iium.edu.my/87119/ http://testmagzine.biz/index.php/testmagzine/article/view/7393 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The objective of this paper are to predict the cutting force using predictive model of finite
element method (FEM) and validate thru experiments, and to analyze the influence of
cutting parameters during the circular end milling of AISI 1018 medium carbon still
employing uncoated carbide tool. Three level of cutting speed, feed rate and depth of cut
are designed accordingly. Result of cutting forces is evaluated and validated. Analysis
also been made by considering the percentage of error in FEM and experimental work by
Dynoware Software. The results obtained by simulation using Abaqus software and
experimental work, it shows small percentage of error and it is suggested that the
predictive model is reliable whereas the FEM value captures the qualitative trends fairly
well in regard to the change of cutting speed, feed rate and depth of cut |
|---|