Analysis of bubble departure and lift-off boiling model using computational intelligence techniques and hybrid algorithms
The bubble departure and lift-off boiling (BDL) model was studied using computational intelligence techniques and hybrid algorithms. Quite a few studies have predicted the relationship between wall heat fluxes and wall temperature in the form of flow boiling curves. The output wall temperature is a...
Saved in:
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Article |
| Language: | en en |
| Published: |
Elsevier
2024
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/108501/7/108501_Analysis%20of%20bubble%20departure%20and%20lift-off%20boiling%20model.pdf http://irep.iium.edu.my/108501/19/108501_%20Analysis%20of%20bubble%20departure%20and%20lift-off%20boiling%20model_Scopus.pdf http://irep.iium.edu.my/108501/ https://www.sciencedirect.com/science/article/abs/pii/S1290072923006713 https://doi.org/10.1016/j.ijthermalsci.2023.108810 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The bubble departure and lift-off boiling (BDL) model was studied using computational intelligence techniques and hybrid algorithms. Quite a few studies have predicted the relationship between wall heat fluxes and wall temperature in the form of flow boiling curves. The output wall temperature is a performance indicator that depends on many operating parameters. The current study, therefore, analyses the predictability of the wall temperature in terms of operating pressure, bulk flow velocity, and wall heat flux, based on the BDL model developed by Zenginer, which included two suppression factors namely, flow-induced and subcooling factors, respectively. The soft computing techniques used for prediction were - the artificial neural network (ANN), and the Fuzzy Mamdani model, and the hybrid algorithms were adaptive neuro-fuzzy inference system (ANFIS) and artificial neural network trained particle swarm optimization (ANN PSO). In addition, the ANN-PSO conducted a parametric analysis to evaluate the best model configuration by considering various factors. The comparison of all four techniques showed that the ANFIS model exhibited the prediction performance for wall temperature. Moreover, the results obtained from the ANFIS model have been compared with the different flow boiling curves from the literature and observed that the curve fitted well for higher bulk flow velocities with an MSE and R2 was found to be 0.85 % and 0.9933, respectively. |
|---|