Enhancing Shear Strength in RC Beams: A Synergistic Approach with Steel Chips and Wire Mesh
This study explores a hybrid approach aimed at enhancing the shear performance of reinforced concrete (RC) beams. The methodology involves the incorporation of industrial steel chips having length 75mm to 100mm in combination with varying widths of wire mesh reinforcement. Comprehensive shear t...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | en |
| Published: |
Penerbit Universiti Kebangsaan Malaysia
2025
|
| Online Access: | http://journalarticle.ukm.my/26752/1/11.pdf http://journalarticle.ukm.my/26752/ https://www.ukm.my/jkukm/volume-3701-2025/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This study explores a hybrid approach aimed at enhancing the shear performance of reinforced concrete (RC) beams.
The methodology involves the incorporation of industrial steel chips having length 75mm to 100mm in combination
with varying widths of wire mesh reinforcement. Comprehensive shear tests were conducted on precisely prepared
beam specimens measuring 150mm×150mm×900mm to assess shear strength, crack patterns, and failure modes. The
study induces steel chips into the concrete mix at a rate of 0.9% by weight and comprises eight sets of specimens,
including a control sample without any mesh reinforcement, along-with specimens reinforced with wire mesh strips
ranging from 12.5mm to 87.5mm in width. Notably, the inclusion of steel chips and wire mesh enhances the shear
behavior of concrete beams across all samples. As the steel chips and wire mesh acts like small-diameter bars,
contributing to the enhancement of shear by improving the interlocking of concrete constituents and eff ectively
distributing stresses throughout the beam’s cross-section, leading to distinctive diagonal crack patterns on the beam
surfaces. The study unveils that with the increasing width of the wire mesh, there is an increase in the number of
cracks while the crack widths decreases. The test outcome reveals that percentages increase of 13.66, 22.89, 31.37,
46.50, 55.00, 66.80 and 78.60 respectively, demonstrating the eff ective enhancement of shear strength through the
utilization of wire mesh and steel chips. |
|---|