Search Results - Khidhir B.A.

  • Showing 1 - 8 results of 8
Refine Results
  1. 1
    Machining of nickel based alloys using different cemented carbide tools

    Machining of nickel based alloys using different cemented carbide tools by Khidhir B.A., Mohamed B.

    Published 2023
    Article
    Save to List
    Saved in:
  2. 2
    Optimization of multi-layer welding of titanium alloy

    Optimization of multi-layer welding of titanium alloy by Ahmed Y.M., Mohamed Sahari K.S., Khidhir B.A., Ishak M.

    Published 2023
    Article
    Save to List
    Saved in:
  3. 3
    Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling

    Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling by Ali M.H., Ansari M.N.M., Khidhir B.A., Mohamed B., Oshkour A.A.

    Published 2023
    Article
    Save to List
    Saved in:
  4. 4
    Finite element modeling for prediction of stress - strain at several feed rates and cutting speeds for titanium (Ti-6Al-4V) alloy

    Finite element modeling for prediction of stress - strain at several feed rates and cutting speeds for titanium (Ti-6Al-4V) alloy by Ali M.H., Khidhir B.A., Mohamed B.

    Published 2023
    Conference paper
    Save to List
    Saved in:
  5. 5
    Selecting of cutting parameters from prediction model of cutting force for turning nickel based hastelloy C-276 using response surface methodology

    Selecting of cutting parameters from prediction model of cutting force for turning nickel based hastelloy C-276 using response surface methodology by Khidhir B.A., Mohamed B.

    Published 2023
    Article
    Save to List
    Saved in:
  6. 6
    FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy

    FEM to predict the effect of feed rate on surface roughness with cutting force during face milling of titanium alloy by Ali M.H., Khidhir B.A., Ansari M.N.M., Mohamed B.

    Published 2023
    Article
    Save to List
    Saved in:
  7. 7
    Finite element modeling for prediction the effect of nose radius on cutting forces for titanium (Ti-6Al-4V) alloy

    Finite element modeling for prediction the effect of nose radius on cutting forces for titanium (Ti-6Al-4V) alloy by Ali M.H., Mohamed B., Ansari M.N.M., Khidhir B.A.

    Published 2023
    Article
    Save to List
    Saved in:
  8. 8
    Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy

    Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy by Khidhir B.A., Mohamed B.

    Published 2023
    Article
    Save to List
    Saved in:

Search Tools: