Turbulent pipe flow of a drag reducing, rigid “rod-like” polymer solution
Fully-developed turbulent pipe flow of an aqueous solution of a rigid “rod-like” polymer, scleroglucan, at concentrations of 0.005% w/w and 0.01% w/w has been investigated experimentally. Fanning friction factors were determined from pressure-drop measurements for the Newtonian solvent (water) and t...
Saved in:
| Main Authors: | , , |
|---|---|
| 格式: | Article |
| 出版: |
2009
|
| 主题: | |
| 在线阅读: | http://eprints.utp.edu.my/2449/1/JNNFM_published.pdf http://eprints.utp.edu.my/2449/ |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Fully-developed turbulent pipe flow of an aqueous solution of a rigid “rod-like” polymer, scleroglucan, at concentrations of 0.005% w/w and 0.01% w/w has been investigated experimentally. Fanning friction factors were determined from pressure-drop measurements for the Newtonian solvent (water) and the polymer solutions and so levels of drag-reduction for the latter. Mean axial velocity u and complete Reynolds normal-stress data, i.e. u', v' and w', were measured by means of a laser Doppler anemometer at three different Reynolds numbers for each fluid. The measurements indicate that the effectiveness of scleroglucan as a drag-reducing agent is only mildly dependent on Reynolds number. The turbulence structure essentially resembles that of flexible polymer solutions which also lead to low levels of drag reduction. |
|---|