表紙画像

Decolourization of recovered base oil from used lubricant oil: a study on the performance of composite adsorbents

The process of decolourizing used oil is usually done by adsorption to remove the darkish colour and lighten the oil for further purification [1]. This paper discusses the results of a study carried out to determine the performance of composite adsorbents comprising a mixture of activated carbon and...

保存先:

書誌詳細
主要な著者:	Hishamuddin, Elina, Foo, Chwan Yee, Mohd Yunus, Rosli, Lim, Lee Ping, Ripin, Adnan
フォーマット:	論文
言語:	English
出版事項:	Faculty of Chemical and Natural Resources Engineering, UTM 2001
主題:	T Technology (General)
オンライン･アクセス:	http://eprints.utm.my/id/eprint/5079/1/ElinaHishamuddin2001_DecolourizationOfRecoveredBaseOil.pdf http://eprints.utm.my/id/eprint/5079/
タグ:	タグ追加タグなし, このレコードへの初めてのタグを付けませんか!

類似資料

Adsorption of heavy metal from recovered base oil using zeolite
著者:: Ali, Susiwi M. W., 等
出版事項: (2010)

Adsorption of heavy metals from recovered base oil using zeolite
著者:: Susiwi, Susiwi, 等
出版事項: (2009)

Extraction and membrane purification of base oil from used lubricant oil
著者:: Lim, Lee Ping
出版事項: (2001)

Coal bottom ash for palm oil mill effluent (POME) decolourization
著者:: Mohammad Saleh, Syahin, 等
出版事項: (2017)

Decolourization Of Brilliant Green Dye In Aqueous Media By Using Modified Mof-5 Adsorbent
著者:: Razaman, Noor Suhaila
出版事項: (2022)

Used lubricating oil treatment using acid activation clay as adsorbent for oil recovery
著者:: S M Anisuzzaman, 等
出版事項: (2024)

Utilization and optimization of industrial bottom ash for palm oil mill effluent decolourization
著者:: Mohammad Saleh, Syahin
出版事項: (2019)

Recovery and characterization of used lubricating oil using acid with two different adsorbents
著者:: S M Anisuzzaman, 等
出版事項: (2022)

Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication
著者:: N. E. H., Zamiruddin, 等
出版事項: (2021)

Tribological evaluation of solid lubricant enriched in modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) oil for composite material
著者:: Talib, N., 等
出版事項: (2021)

Raptor tracking and counting with blue sky decolourization.
著者:: Choo, Chun Leong
出版事項: (2013)

Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubricant during machining
著者:: Sharif, Safian, 等
出版事項: (2009)

Study of oil flow rates effects on lubricant oil behaviour during minimum quantity lubrication milling process
著者:: Nur Izzati Khoirunnisa, Ismail, 等
出版事項: (2020)

Removal of metals from recovered base oil using chitosan
著者:: Jamil, Siti Munira
出版事項: (2011)

Adsorption of metals from recovered base oil using zeolite
著者:: Susiwi, Susiwi
出版事項: (2010)

Critical review on the use of natural surfactants in enhanced oil recover
著者:: Ali, Amr. Abdellatif
出版事項: (2021)

Deoiling efficiency for oil extraction from spent bleaching clay and the quality of recovered oil
著者:: Abd. Wafti, Nur Sulihatimarsyila, 等
出版事項: (2011)

Optimization of hybrid coagulation / flocculation-sand filtration system for decolourization of anaerobically digested palm oil mill effluent
著者:: Nasimah Asmuran
出版事項: (2015)

Herbal extract decolourization device using activated carbon
著者:: Teh, Liam Chee, 等
出版事項: (2013)

Lubricant firm oils ties
著者:: Zulkifli, Abd Rahman
出版事項: (2018)

Lubricant firm oils ties
著者:: Zulkifli, Abd Rahman
出版事項: (2017)

Zinc chloride-activated waste carbon powder for decolourization of methylene blue
著者:: Ahmad Zaini, Muhammad Abbas, 等
出版事項: (2014)

STUDY ON THE CHANGE OF ASPHALTENE CONTENT OF THE RECOVERED OIL DURING C02 INJECTION FOR LIGHT OIL
著者:: ABDUL SALAM, IRZIE HANI
出版事項: (2011)

Decolourization of textile wastewater by using Lactobacillus immobilized on Bambusa heterostachya / Nur Hazirah Rosli
著者:: Rosli, Nur Hazirah
出版事項: (2016)

Augmented yeast-extract and diary-waste for enhancing bio decolourization of palm oil mill effluent using activated sludge
著者:: Abdulsalam, Mohammed, 等
出版事項: (2020)

SIMULATION OF LOW SALINITY WATERFLOOD WAG TO RECOVER WAXY CRUDE OIL
著者:: TABRI, AISHAH
出版事項: (2021)

Rysoil™ - high performance synthetic lubricants from palm oil
著者:: Yunus, Robiah
出版事項: (2005)

Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication
著者:: Nur Izzati Khoirunnisa, Ismail, 等
出版事項: (2020)

Vegetable oil as bio-lubricant and natural additive in lubrication: A review
著者:: Nor Azmmi, Masripan, 等
出版事項: (2020)

Vegetable oil as bio-lubricant and natural additive in lubrication: a review
著者:: Masripan, Nor Azmmi, 等
出版事項: (2020)

Hydrophilic hollow fiber pvdf ultrafiltration membrane incorporated with titanate nanotubes for decolourization of aerobically-treated palm oil mill effluent
著者:: Subramaniam, Mahesan Naidu, 等
出版事項: (2017)

Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process
著者:: Nurrina, Rosli, 等
出版事項: (2023)

Recycling and characterisation of spent lubricating oil
著者:: Uthman, H.
出版事項: (2017)

Lubricity of Jatropha Oil Based Mud
著者:: Ibrahim, Ahmad Adli
出版事項: (2013)

Irradiated water-activated waste tyre powder for decolourization of reactive orange 16
著者:: Ahmad Zaini, Muhammad Abbas, 等
出版事項: (2014)

Development of chitosan based adsorbent for removal of oil from industrial wastewater
著者:: Yunus, Rosli Mohd, 等
出版事項: (2012)

Tribological evaluation of mineral oil and vegetable oil as a lubricant
著者:: Samion, Syahrullail, 等
出版事項: (2014)

The Use Of Vegetable Oil In Lubricant As Base Oil: a Review
著者:: Abdulbari, Hayder A., 等
出版事項: (2009)

Alternative lubricants: study on palm oil-based lubricants in metal forming process
著者:: Nurul, M. A., 等
出版事項: (2016)

Alternative lubricants: study on palm oil-based lubricants in metal forming process
著者:: Nurul, M. A., 等
出版事項: (2016)