Geopolymer lightweight bricks manufactured from fly ash and foaming agent
This paper deals with the development of lightweight geopolymer bricks by using foaming agent and fly ash. The mix parameters analysed through a laboratory experiment with fix ratio of sodium silicate/sodium hydroxide solution mass ratio 2.5, fly ash/alkaline activator solution mass ratio 2.0, foami...
Saved in:
Main Authors: | Wan Ibrahim, Wan Mastura, Hussin, Kamarudin, Abdullah, Mohd Mustafa Al Bakri, Abdul Kadir, Aeslina |
---|---|
格式: | Article |
語言: | English |
出版: |
American Institute of Physics
2017
|
主題: | |
在線閱讀: | http://eprints.uthm.edu.my/3438/1/AJ%202017%20%2847%29%20Geopolymer%20lightweight%20bricks%20manufactured.pdf http://eprints.uthm.edu.my/3438/ http://dx.doi.org/10.1063/1.4981870 |
標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
相似書籍
-
Influence of foaming agent/water ratio and foam/geopolymer paste ratio to the properties of fly ash-based lightweight geopolymer for brick application
由: Wan Ibrahim, Wan Mastura, et al.
出版: (2017) -
Mechanical performance of lightweight
brick at elevated temperature
由: Adnan, Suraya Hani, et al.
出版: (2021) -
Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content
由: Ismail, Sushilawati
出版: (2014) -
Sound absorption of lightweight brick containing expanded polystyrene beads and palm oil fuel ash
由: Adnan1, S H, et al.
出版: (2020) -
Effect of heating rate on gas emissions and properties of fired clay bricks and fired clay bricks incorporated with cigarette butts
由: Abdul Kadir, Aeslina, et al.
出版: (2015)