Flow analysis and shear rate comparison of counter-rotating and co-rotating intermeshing twin-screw extruders for filament extrusion of polypropylene-based biocomposites
This study investigates and compares the performance of counter-rotating and co-rotating intermeshing twin-screw designs in filament extruder machines. The research sought to determine whether the counter-rotating intermeshing design with its opposite flow direction offers advantages over the co-ro...
محفوظ في:
| المؤلفون الرئيسيون: | , , , , , |
|---|---|
| التنسيق: | مقال |
| اللغة: | English |
| منشور في: |
Universiti Putra Malaysia Press
2024
|
| الوصول للمادة أونلاين: | http://eprints.utem.edu.my/id/eprint/27672/2/0118310072024125922.PDF http://eprints.utem.edu.my/id/eprint/27672/ http://www.pertanika.upm.edu.my/pjst/browse/special-issue?article=JST(S)-0636-2024 https://doi.org/10.47836/pjst.32.S2.01 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | This study investigates and compares the performance of counter-rotating and co-rotating intermeshing twin-screw designs in filament extruder machines. The research sought
to determine whether the counter-rotating intermeshing design with its opposite flow direction offers advantages over the co-rotating intermeshing design in terms of flow
analysis and shear rates. Flow analysis was conducted to examine the velocity of the polypropylene-based biocomposite material inside the barrel. Shear rate data was obtained by evaluating the relationship between shear rate and screw speed to assess the stability and maximum shear rate of the twin-screw extruders. The results revealed that the
counter-rotating intermeshing twin-screw extruders exhibited higher shear rates and more consistent pressure compared to
the co-rotating intermeshing design. The superiority of the counter-rotating extruder was attributed to its opposite flow direction and distinct thread shapes, facilitating efficient material compression and improved dispersion of polymer-based biocomposite materials. The study suggested the potential for further exploration and refinement of the counter-rotating intermeshing twin-screw extruder design, particularly in producing polypropylene-based biocomposite filaments for Fused Deposition Modeling (FDM) machines |
|---|