Design And Implementation Of Embedded Active Rfid System With Strain Sensor
Conventionally, machine condition monitoring is applied in the industry, using the wired system for monitoring the machine condition. This method can cause expensive cable installation, difficult replacement, workspace limitation and manual data collection for maintenance. Therefore, it is approp...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Thesis |
| 语言: | English |
| 出版: |
2014
|
| 主题: | |
| 在线阅读: | http://eprints.usm.my/61097/1/24%20Pages%20from%2000001783520.pdf http://eprints.usm.my/61097/ |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | Conventionally, machine condition monitoring is applied in the industry, using the wired
system for monitoring the machine condition. This method can cause expensive cable
installation, difficult replacement, workspace limitation and manual data collection for
maintenance. Therefore, it is appropriate to develop an active RFID system as a solution. The
work presented in this thesis contributes to the research of the 2.4 GHz active RFID system
with strain sensor integration in several ways such as the design and embedment of the RFID
tag that consists of the strain sensor, microcontroller and RF transceiver module; the
implementation of the RFID tag that transmits information data, wireless, to the RFID reader
for data monitoring and storage; and the performance evaluation of the active RFID system
in various aspects including calibration based on wireless and wired prototypes , operating
frequency verification, periodic transmission accuracy, maximum read range measurement at
indoor and outdoor environments and estimation of power consumption of the tag. It is
observed that the strain data reading, through wired and wireless transmission from the
proposed RFID system provide an acceptable, stable and less error strain reading values. |
|---|