Finite element study of deformation behaviour of Al- 6063 alloy developed by equal channel angular extrusion
The objective of this work is to evaluate the equivalent plastic strain levels induced by equal channel angular extrusion (ECAE) in an annealed Al-6063 alloy after six passes at a temperature of 200°C following route A with a constant ram speed of 30 mm/min through a die angle of 90° between the die...
Saved in:
| Main Authors: | , , , , |
|---|---|
| 格式: | Article |
| 语言: | English |
| 出版: |
Trans Tech Publications
2014
|
| 在线阅读: | http://psasir.upm.edu.my/id/eprint/37676/1/Finite%20element%20study%20of%20deformation%20behaviour%20of%20Al-%206063%20alloy%20developed%20by%20equal%20channel%20angular%20extrusion.pdf http://psasir.upm.edu.my/id/eprint/37676/ http://www.scientific.net/AMR.1043.119 |
| 标签: |
添加标签
没有标签, 成为第一个标记此记录!
|
| 总结: | The objective of this work is to evaluate the equivalent plastic strain levels induced by equal channel angular extrusion (ECAE) in an annealed Al-6063 alloy after six passes at a temperature of 200°C following route A with a constant ram speed of 30 mm/min through a die angle of 90° between the die channels using the finite element method (FEM). ECAE process is simulated using the DEFORM-3D software through a three-dimensional analysis. Grain refinement is simulated by forcing the element size to zero. It is found that for a very fine mesh the PEEQ converges to 1.046. |
|---|