Analysis of Atomization Performance of Linear Laval Nozzle under Varied Water Pressures Based on VOF and DPM Models
Particulate matter from coal and stone operations is a primary air pollution source. The traditional nozzle requires high-pressure conditions, and the atomization droplets are large and uneven. This paper aims to study a linear Laval nozzle and investigate the impact of water pressure on atomizati...
محفوظ في:
| المؤلفون الرئيسيون: | , , , , |
|---|---|
| التنسيق: | مقال |
| اللغة: | English |
| منشور في: |
Taiwan Association of Engineering and Technology Innovation.
2024
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://ir.unimas.my/id/eprint/46647/1/Analysis%20of%20Atomization.pdf http://ir.unimas.my/id/eprint/46647/ https://ojs.imeti.org/index.php/IJETI/article/view/13615 https://doi.org/10.46604/ijeti.2024.13615 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | Particulate matter from coal and stone operations is a primary air pollution source. The traditional nozzle
requires high-pressure conditions, and the atomization droplets are large and uneven. This paper aims to study a
linear Laval nozzle and investigate the impact of water pressure on atomization performance. The volume of fluid
(VOF) model and discrete phase model (DPM) of Fluent are used to simulate the internal and external fields of the
nozzle and analyze the velocity, droplet size, and atomization angle. The results show that the optimized water
pressure parameters are 0.1 MPa with an air pressure of 0.5 MPa. Droplets in the middle are smaller, while those on
the sides are larger. Compared to traditional nozzles, the water pressure is reduced by over 90%, and the Sauter mean
diameter (SMD) decreases by over 50%. Moreover, the theoretical spray angle increases by approximately 150%. |
|---|