封面图片

Cutting performance of different coatings during minimum quantity lubricant milling of AA6061T6

This report presents an experimental investigation on the effects of output parameters which are surface roughness, tool wear and material removal rate during machining aluminum alloy 6061-T6 using minimum quantity lubricant (MQL) technique. The minimum quantity of lubrication technique was becoming...

Saved in:

书目详细资料
主要作者:	Mohd Khairil Hafizi, Khairolazar
格式:	Undergraduates Project Papers
语言:	English
出版:	2013
主题:	TJ Mechanical engineering and machinery
在线阅读:	http://umpir.ump.edu.my/id/eprint/8394/1/01.Corrosion%20inhibition%20by%20henna%20leaves%20extract%20in%20industrial%20wastewater.pdf http://umpir.ump.edu.my/id/eprint/8394/
标签:	添加标签没有标签, 成为第一个标记此记录!

相似书籍

Experimental investigation of the minimum quantity lubrication in end-milling of AA6061T6 by coated carbide tools
由: Abdul Muhaimin, Aris
出版: (2013)

Experimental Study on Minimum Quantity Lubrication in End Milling of AA6061-T6 Using Tialn Coated Carbide Tools
由: Najiha, M. S., et al.
出版: (2015)

Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6
由: Najihah, Mohamed, et al.
出版: (2015)

Multi-Objective Optimization of Minimum Quantity Lubrication in end Milling of Aluminum Alloy AA6061T6
由: Najiha, M. S., et al.
出版: (2015)

Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools
由: M., Puvanesan, et al.
出版: (2014)

Experimental investigation of minimum quantity lubrication on tool wear in aluminum alloy 6061-T6 using different cutting tools
由: Puvanesan, Muthusamy
出版: (2013)

Performance Of Water-Based TiO2 Nanofluid During The Minimum Quantity Lubrication Machining Of Aluminium Alloy, AA6061-T6
由: Najiha, M. S., et al.
出版: (2016)

Dry machining and minimum quantity lubricant of aluminum alloy 6061-t6 using coated carbide tools
由: Nur Amirra, Rashid
出版: (2013)

Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication
由: Najiha, M. S., et al.
出版: (2015)

Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication
由: Jeevan, T. P., et al.
出版: (2021)

Designing new minimum quantity of lubrication (MQL) applicator for milling
由: Steven Joel, Anak Total
出版: (2017)

Study of oil flow rates effects on lubricant oil behaviour during minimum quantity lubrication milling process
由: Nur Izzati Khoirunnisa, Ismail, et al.
出版: (2020)

Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubricant during machining
由: Sharif, Safian, et al.
出版: (2009)

Effects of minimum quantity lubrication technique in different machining
由: Urmi, W. T., et al.
出版: (2022)

Measurement of lubricant oil film thickness under minimum quantity lubrication milling process
由: Nur Elya Haniza, Zamiruddin
出版: (2022)

Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication
由: Nur Izzati Khoirunnisa, Ismail, et al.
出版: (2020)

Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
由: Najiha, M. S., et al.
出版: (2015)

Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
由: Kyung, Hee Park, et al.
出版: (2017)

Investigation of Lubricant Oil Film Thickness on Workpiece under Minimum Quantity Lubrication Milling Process
由: Nurrina, Rosli, et al.
出版: (2023)

Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes
由: Najiha, M. S., et al.
出版: (2012)

A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations
由: Sharif, S., et al.
出版: (2017)

Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material
由: Jamaludin, Ahmad Shahir, et al.
出版: (2019)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
由: Abdul Sani, Amiril Sahab, et al.
出版: (2023)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
由: Abdul Sani, Amiril Sahab, et al.
出版: (2024)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
由: Abdul Sani, Amiril Sahab, et al.
出版: (2023)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
由: Amiril Sahab, Abdul Sani, et al.
出版: (2024)

Investigation of accuracy in microdrilling with minimum quantity lubrication
由: Mohammad, Yeakub Ali, et al.
出版: (2017)

Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach
由: Najiha, M. S., et al.
出版: (2016)

OBSERVING TOOL WEAR DURING MILLING MILD STEEL IN MINIMUM QUANTITY LUBRICATION (MQL) USING PALM OIL
由: FELIX FERNANDEZ, BANLEHONG
出版: (2019)

Experimental investigation of minimum quantity lubrication in meso-scale milling with varying tool diameter
由: Yusof, M. Q.M., et al.
出版: (2018)

Noble approach to control vibration using minimum quantity lubrication (MQL) in micro milling
由: Yeakub Ali, Mohammad, et al.
出版: (2019)

Influence of cutting condition on chip morphology when turning hardened stainless steel using coated carbide cutting tools under minimum quantity of lubrication
由: Saad Elmunafi, Mohamed Handawi, et al.
出版: (2020)

Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant
由: Elmunafi, Mohamed Handawi Saad, et al.
出版: (2015)

Minimum quantity lubrication in micromachining: A greener approach
由: Zulkifli, Ahmad Syahmi Arham, et al.
出版: (2016)

Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil
由: Elmunafi, Mohamed Handawi Saad, et al.
出版: (2015)

Process capability of high speed micro end-milling of Inconel 718 with minimum quantity lubrication
由: Abd. Rahman, Mohamed, et al.
出版: (2017)

Friction condition of aluminum alloy AA6061 lubricated with bio-lubricant in cold forging test
由: Yahaya, Aiman, et al.
出版: (2022)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
由: Ainur Munira, Rosli, et al.
出版: (2019)

Modeling of the End Milling Process for Aluminium Alloy AA6061T6 Using HSS Tool
由: Najiha, M. S., et al.
出版: (2013)

Modeling of the end milling process for aluminum alloy AA6061T6 using hss tool
由: Najiha, M. S., et al.
出版: (2013)