封面圖片

Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach

Direct injection system for CNG fuel is a new development hence; the losses in solenoid drive direct fuel injector are not yet studied. The losses are suspected as the major cause for fluctuating injector mass flow rate which affected the engine torque stability due to the power losses. Solenoid dri...

Saved in:

書目詳細資料
主要作者:	Abdul Rahim, M. F.
格式:	Research Report
語言:	English
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://umpir.ump.edu.my/id/eprint/36557/1/Optimization%20of%20solenoid%20driver%20and%20controller%20for%20gaseous%20fuel%20high-pressure%20direct%20injector%20using%20model-based%20approach.wm.pdf http://umpir.ump.edu.my/id/eprint/36557/
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Optimization of solenoid driver and controller for gaseous fuel high-pressure direct injector using model-based approach
由: Mohamad Hafidzul Rahman, Alias
出版: (2022)

Simulation of gaseous fuel injector geometries of mult holes nozzle by using CNG engine
由: Muhamad Akhbar Osman, Md. Hashim
出版: (2009)

Design, Fabricate and Test of an Injector Driver for Automotive Direct Injector
由: Mohd Yunus, Taufiqurrahman
出版: (2009)

DESIGN, FABRICATE AND TEST OF AN INJECTOR DRIVER FOR AUTOMOTIVE DIRECT INJECTOR
由: Mohd Yunus, Taufiqurrahman B.
出版: (2009)

High speed combustion of gaseous hydrocarbon fuels
由: Abdul Wahid, Mazlan, et al.
出版: (2008)

Effect of Injection Pressure, Injection Duration, and Injection Frequency on Direct Injector’s Mass Flow Rate for Compressed Natural Gas Fuel
由: Mohamad Hafizul Rahman, Alias, et al.
出版: (2018)

Injection Characteristics Study of High Pressure Direct Injector for Compressed Natural Gas (CNG) using Experimental and Analytical Method
由: Zahari, Taha, et al.
出版: (2017)

Injection characteristics study of high-pressure direct injector for Compressed Natural Gas (CNG) using experimental and analytical method
由: Mohd Fadzil, Abdul Rahim, et al.
出版: (2017)

Fuel rail for direct injection gaseous engine.
由: Taha, Zahari, et al.
出版: (2006)

Investigation into the selection of an appropriate piston head geometry for a spark ignition engine equipped direct-fuel injector
由: Anuar, Abdul Rahim Shar, et al.
出版: (2015)

Rapid premixing fuel-water injector in burner combustion
由: Suardi, Mirnah
出版: (2015)

Method for controlling multiple-injection of gaseous fuel in a direct injection engine.
由: Sahari, Barkawi
出版: (2005)

Rapid premixing fuel-water injector in burner combustion
由: Suardi, Mirnah
出版: (2016)

Single hole direct injector simulation validation and parametric sensitivity study
由: Mohamad Hafidzul Rahman, Alias, et al.
出版: (2019)

Design and simulation of prechamber with high pressure CNG injector system for single cylinder four stroke engine
由: Mohd Fadzli, Mat Lazim
出版: (2012)

Development Of Electronically Controlled Common Rail Fuel Injection System And Optimization Of Injector Parameters In Single Cylinder Diesel Engine
由: Peh, Ching Guan
出版: (2018)

In-water injection of high-pressure pulsed gas jet: A simple analytical tool for direct injection of gaseous fuels in automotive engine
由: Mohamad, Taib Iskandar
出版: (2015)

Development of a direct fuel injector for a two-stroke gasoline engine
由: Mohd Ali, Mas Fawzi
出版: (2007)

Design and development of a five-fingered master-slave robotic hand by using solenoid and pressure sensors comparator technology solenoid actuation system
由: Zainal S., et al.
出版: (2023)

A Study Of Acoustic Emission Intensity Effect During Fuel Injector Fault
由: Z. M., Hafizi, et al.
出版: (2010)

Optimization of CNG Direct Injector Parameters using model-based calibration framework
由: Mohamad Hafidzul Rahman, Alias, et al.
出版: (2021)

Effects of varying injector opening pressure on the performance of a B20 JOME biodiesel fueled diesel engine / S. Jaichandar...[et al.]
由: S., Jaichandar, et al.
出版: (2018)

Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems
由: Abd. Rahman, Ramhuzaini, et al.
出版: (2017)

Reacting shock waves characteristics for biogas compared to other gaseous fuel
由: Abdul Wahid, Mazlan, et al.
出版: (2012)

Simulation of direct injection, mixing and combustion of CNG fuel in a single - cylinder engine with different injector orientations using CFD
由: Mohd Azlan Fahmi, Muhammad Azmi, et al.
出版: (2022)

Combustion characteristics of methane in a direct injection engine using spark plug fuel injector
由: Taib Iskandar Mohamad,
出版: (2010)

Conceptual development of a pressure-swirl injector for a two-stroke GDI engine
由: Abdul Aziz, Azhar, et al.
出版: (2006)

Parametric optimization of engine performance and emissions for hydroxy blended gaseous fuels
由: Ijaz Malik, Muhammad Ali, et al.
出版: (2024)

Flame ionization testing in an internal combustion engine to measure the speed of the flame for gaseous fuels
由: K., Mohanesen, et al.
出版: (2019)

Impact of biodiesel on injector deposit formation
由: Liaquat, A.M., et al.
出版: (2012)

Solenoid actuated five-fingered robotic hand design: Evaluating the capability of solenoid actuators in generating basic finger motions
由: Bahrin S.Z.A.S.K., et al.
出版: (2023)

A study on a swirl type multi-hole fuel injector for a PFI system to improve air-fuel mixture formation
由: Alimin, A. J., et al.
出版: (2017)

Discussion of the technology and research in fuel injectors common rail system
由: Maskan, Muhammad Haziq, et al.
出版: (2017)

Concentration measurement of injected gaseous fuel using quantitative schlieren and optical tomography
由: Iffa, Emishaw D., et al.
出版: (2010)

Concentration Measurement of Injected Gaseous Fuel Using Quantitative Schlieren and Optical Tomography
由: Iffa, Emishaw D., et al.
出版: (2010)

Design and development of a new electromagnetic prime mover using solenoid technology: Solenoid Powered Engine mathematical derivations (inductance variation)
由: Bahrin S.Z.A.S.K., et al.
出版: (2023)

Physical characteristic analysis of solenoid-based coil structure
由: Sulaiman, Nadzril, et al.
出版: (2012)

The performance of turbocharged diesel engine with injected calophyllum inophyllum methyl ester blends and inducted babul wood gaseous fuels
由: Nayak, S. K., et al.
出版: (2019)

Cooling of microchannel heat sinks with gaseous coolants
由: Mohammed Adham, Ahmed, et al.
出版: (2013)

Burning Rates of Turbulent Gaseous and Aerosol Flames
由: Sulaiman, S. A., et al.
出版: (2009)