Bending strength properties of engineered slice lumber from OPT mixed with low density hardwood / Mohd Fadhli Othman
The bending strength properties of Engineered Slice Lumber (slice cut) from Oil Palm Trunk (OPT) mixed with Low Density Hardwood are being determined. Low Density Hardwood such as Kelempayan (Neolamarckia cadamba), Sesenduk (Endospermum malaccense) and Acacia (Acacia mangium) has never been regarded...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| التنسيق: | Student Project |
| اللغة: | English |
| منشور في: |
2013
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://ir.uitm.edu.my/id/eprint/76562/1/76562.PDF https://ir.uitm.edu.my/id/eprint/76562/ |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | The bending strength properties of Engineered Slice Lumber (slice cut) from Oil Palm Trunk (OPT) mixed with Low Density Hardwood are being determined. Low Density Hardwood such as Kelempayan (Neolamarckia cadamba), Sesenduk (Endospermum malaccense) and Acacia (Acacia mangium) has never been regarded as structural material due to their inferior strengths. The qualities of boards are evaluated by determining the bending strength properties that consist of modulus of elasticity (MOE) and modulus of rupture (MOR). The comparison of bending strength properties in different species, shows Acacia is suitable to be used in manufacturing of Engineered Slice Lumber (slice cut). On the other hand, the better design of arrangement shows that alternate design gave good properties of bending strength. The bending Strength properties were determined according to the British Standard (BS EN 373:1957), Method of Testing Small Clear Specimen of Timber. |
|---|