Reversed L-type matching impedance of RF-to-DC rectifier for energy harvesting system / Nuraiza Ismail and Ermeey Abd Kadir
This paper presents the analysis of an RF energy harvesting system using a novel design of harvester antenna and wirelessly connected to reversed L-type matching impedance integrated with a 2-stage rectifier circuit. The rectifier circuit is based on a voltage doubler-type topology comprising only t...
محفوظ في:
| المؤلفون الرئيسيون: | , |
|---|---|
| التنسيق: | مقال |
| اللغة: | English |
| منشور في: |
Universiti Teknologi MARA
2021
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://ir.uitm.edu.my/id/eprint/52084/1/52084.pdf https://ir.uitm.edu.my/id/eprint/52084/ https://jeesr.uitm.edu.my/ |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | This paper presents the analysis of an RF energy harvesting system using a novel design of harvester antenna and wirelessly connected to reversed L-type matching impedance integrated with a 2-stage rectifier circuit. The rectifier circuit is based on a voltage doubler-type topology comprising only two circuit components which are a capacitor and Schottky diode that are capable of receiving a Wi-Fi input signal of 2.45 GHz from a harvester antenna. The antenna design is a rectangular patch antenna that is based on a coplanar waveguide feed. The zero biased Schottky diode of the SMS7630 model is chosen for the rectification process where the low input signal of -10dBm has successfully rectified the RF input power to the DC output voltage. The simulation results show that the 2-stage rectifier circuit needs impedance matching for a better DC output voltage with a good power conversion efficiency than a rectifier circuit without impedance matching for enabling low-power electronic devices. |
|---|