Removal of reactive red 4 dye using chitosan- epichlorohydrin/ TiO2 nanocomposite: application of response surface methodology / Nurul Najwa Abd Malek … [et al.]
Chitosan-epichlorohydrin/TiO2 composite was synthesized to be employed as an adsorbent for the removal of reactive red 4 (RR4) dye from aqueous solution. Response surface methodology (RSM) with 3-level Box-Behnken design (BBD) was utilized for the optimization of the removal of RR4. The process key...
محفوظ في:
| المؤلفون الرئيسيون: | , , , , |
|---|---|
| التنسيق: | مقال |
| اللغة: | English |
| منشور في: |
Faculty of Applied Sciences
2020
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://ir.uitm.edu.my/id/eprint/47076/1/47076.pdf http://ir.uitm.edu.my/id/eprint/47076/ |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | Chitosan-epichlorohydrin/TiO2 composite was synthesized to be employed as an adsorbent for the removal of reactive red 4 (RR4) dye from aqueous solution. Response surface methodology (RSM) with 3-level Box-Behnken design (BBD) was utilized for the optimization of the removal of RR4. The process key variables which include adsorbent dose (A: 0.5 – 1.5 g), pH (B: 4 – 10) and time (30 – 80 min) were selected for the optimization process. The experimental data for RR4 removal were statistically analysed using analysis of variance (ANOVA). The significant interaction between key parameters on RR4 removal efficiency was observed by interaction between AB and AC. The highest RR4 removal (95.08%) was obtained under the following conditions; adsorbent dose (1.0 g), pH 4 and time of 80 min. |
|---|