封面圖片

Prediction of heat flow through sand mould and its verification on the structure and property of gray cast iron

Heat flows through the mould in casting govern the cooling rate of the liquid which affects the structure and properties of the materials. By controlling the heat flow direction, it is possible to control the structures as well as properties of the materials. To predict the heat-flow through the san...

Saved in:

書目詳細資料
Main Authors:	Shah, Sugrib Kumer, Haque, Md. Mohafizul, Maleque, Md. Abdul
格式:	Article
語言:	English
出版:	Universiti Malaya 2010
主題:	TJ Mechanical engineering and machinery
在線閱讀:	http://irep.iium.edu.my/167/1/Prediction_of_heat_flow_through_sand_mould_%283%29.pdf http://irep.iium.edu.my/167/ http://ejum.fsktm.um.edu.my/ArticleInformation.aspx?ArticleID=997
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Wear behavior of aluminium modified cast iron in comparison with conventional gray cast iron
由: Maleque, Md. Abdul, et al.
出版: (2018)

Wear characteristics of Fe-C-Si and Fe-C-Al cast irons
由: Shaha, Sugrib Kumar, et al.
出版: (2011)

Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons
由: Shaha, Sugrib Kumar, et al.
出版: (2011)

The tribological behaviour of Fe-C-Al cast iron – effect of temperature
由: Maleque, Md. Abdul, et al.
出版: (2013)

Development of a new route for Fe-C-Al cast iron production
由: Shaha, Sugrib Kumar, et al.
出版: (2010)

Effect of heating time on hardness properties of laser clad gray cast iron surface
由: B., Norhafzan, et al.
出版: (2017)

Design and analysis mould for sand casting process (Shrinkage)
由: Idi Azwan, Ariffin
出版: (2012)

Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel
由: Ayob, F., et al.
出版: (2018)

Optimisation of Pulsed Nd: YAG Laser Processing of Gray Cast Iron for Enhanced Surface Properties
由: Fazliana, Fauzun, et al.
出版: (2014)

Thermal analysis of two and three-gate sand casting mould
由: Lim, Alex Kheng Booi
出版: (2001)

Wear properties of Fe-C-Al cast iron and conventional cast iron - a comparative study
由: Maleque, Md. Abdul
出版: (2011)

Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die
由: Hussein, Nur Izan Syahriah, et al.
出版: (2015)

Hardfacing process of Ni-WC on gray cast iron substrate using GMAW method
由: Rasidi, Mohd Kamarul Shaufi
出版: (2017)

Surface Integrity of a High Speed Milling FC300 Gray Cast Iron
由: Mohd, Hadzley, et al.
出版: (2014)

Green compression strength of tin mine tailing sand for green sand casting mould
由: Abdullah, Azhar, et al.
出版: (2013)

Investigation microstructure and mechanical properties of white cast iron using sand casting
由: Muhammad Saiful Azzam, Hamdan
出版: (2011)

Mechanical properties of tin mine tailing sand for greensand casting mould
由: Abdullah, Azhar
出版: (2012)

Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel
由: Baharudin, B.A., et al.
出版: (2022)

Investigation on types of casting defects due to insufficient mould hardness in green sand casting / Ibrahim Ismail
由: Ismail, Ibrahim
出版: (2010)

Properties of Zinc alloy cast product with different composition of Silica Sand and Bentonite in Green Sand Mould
由: Zatil Alyani, Mohd Amin, et al.
出版: (2010)

The effect of coconut dust addtion on the properties of green sand and investment casting moulds
由: S. Alyami, Saad Rabia
出版: (2010)

Laser surface modification of gray cast iron using ND: YAG laser for enhanced surface properties
由: Mohd Norfaez, Ismail
出版: (2013)

Development of automotive sand casting product (cast iron) with CAE/casting simulation assist / Anizan Hamad @ Ahmad.
由: Hamad @ Ahmad, Anizan
出版: (2009)

Investigation on structure and properties of brass casting
由: Haque, Md. Mohafizul, et al.
出版: (2008)

Optimization of Pulsed Nd:YAG Laser Melting of Gray Cast Iron At Different Spot Sizes for Enhanced Surface Properties
由: A. R., Zulhishamuddin, et al.
出版: (2016)

$Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys$

Effect of silicon on strength and fracture surfaces of aluminium–silicon casting and heat treated alloys
由: Haque, Md. Mohafizul, et al.
出版: (2006)

The effect of sand grain size and water on the green compression strength for greensand casting mould mixture
由: A.Azhar,, et al.
出版: (2022)

Investigation on different compositions of clay and water to the permeability of the silica sand used in greensand casting mould
由: A. Azhar,, et al.
出版: (2022)

Mould design and mechanical analysis of the casted material
由: Mohd Azuan, Abu Shah
出版: (2010)

Design and development of mild steel die for production of hip-bone joint
由: Shaha, Sugrib Kumar, et al.
出版: (2010)

$Effect of cooling rate on strength and fracture surfaces of alpha brass casting$

Effect of cooling rate on strength and fracture surfaces of alpha brass casting
由: Haque, Md. Mohafizul, et al.
出版: (2008)

Acrylic Pattern for Sand Mould
由: Mohd Ichwan, Nasution, Ir., et al.
出版: (2008)

Heat Transfer Simulation Of Cast Iron And Aluminium Cylinder Block
由: Ahlami Bin Abdul Latif
出版: (2015)

Computer Aided Design and Analysis in Die/Mould of Casting Process
由: Abedin, Md. Shamsul
出版: (1997)

Effect of two-step austempering heat treatment on the dry sliding wear behavior of austempered ductile cast iron
由: Bello, Kamilu Adeyemi, et al.
出版: (2022)

Investigation on microstructure of heat treated high manganese austenitic cast iron
由: A.K., Muzafar, et al.
出版: (2020)

Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron
由: A.K., Muzafar, et al.
出版: (2020)

Investigation on Microstructure of Heat Treated High Manganese Austenitic Cast Iron
由: Muzafar, A. K., et al.
出版: (2016)

The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould
由: Abdullah, Azhar, et al.
出版: (2011)

Effect of heating temperatures and mould thickness on the geometry shape of in-situ melting magnesium investment casting
由: Abdul Razak, Siti Nur Faezah
出版: (2017)